Material：STEEL, STAINLESS STEEL

INSTALLATION

1.PUNCH OR DRILL PROPERLY SIZED HOLE IN SHEET. DO NOT PERFORM ANY SECONDARY OPERATONS SUCH AS DEBURRING.
2.INSERT STANDOFF THROUGH MOUNTING HOLE OF SHEET AND INTO REQUIRED INSTALLATION ANVIL.
3.WITH PUNCH AND AVNIL SURFACES PARALLEL, APPLY ONLY ENOUGH SEQUEEZING FORCE TO EMBED THE STANDOFF’S HEAD FLUSH IN THE SHEET.DRAWING AT RIGHT SHOWS REQUIRED INSTALLATION ANVIL FOR SHEET THICKNESS OF 0.025TO 0.032IN./0.063 TO 0.81 MM. A CHAMFERED ANVIL IS NOT REQUIRED FOR SHEETS OVER 0.032UB /0.081MM.

ADVANTAGES OF CLINCHING PARTS:

‧MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
‧PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
‧DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
‧REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
‧NO RETAPPING NECESSARY AFTER APPLICATION.
‧LOW INSTALLED COSTS.

STANDOFFS：

‧USED WHERE IT IS NECESSARY TO STACK OR SPACE COMPONENTS AWAY FROM THE PANEL.
‧THRU-THREADED OR BLIND TYPES ARE GENERALLY STANDARD.

★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

More Specifications (PDF)