All Category



博正实业有限公司


CALIBRE Block Tester Kit (Fill Leak Check)

产品型号:CA001133

立即询问产品 加入购物车
详细规格及用途描述

Find and Locate Internal Combustion Leaks
Instruction:
For use on gasoline engines only – not recommended for Diesel.
Remove radiator cap and check coolant level. Siphon or drain coolant until level is 2 or 3 inches below opening (A higher level will permit coolant to be drawn into Leak Check, contaminating the test fluid).
Fill Leak Check with fluid to line.
With engine warm and idling, push rubber cone into radiator opening and hold.
Squeeze and release aspirator (black) bulb for 2 minutes (unless test fluid YELLOW sooner). This action draws air from cooling system and forces it through the test fluid. IF COMBUSTION GASES ARE PRESENT IN THE COOLING SYSTEM – as a result of a cracked head, cracked block or a leaking cylinder head gasket, the test fluid will CHANGE from a BLUE or Blue Green to a YELLOW color.

相关产品
公司名称: 博正实业有限公司

发送询问函给厂商