Detail Specifications / Descriptions

(1) The buyer should prepare below:
1. Supply voltage of transformer：11KV(11000V)
2. Transformer：1600KVA×1 set
3. No fuse switch：2000Amp 3P×2 sets (Ø3 phase)
4. Cooling water tank：30 tons
5. Cooling pump motor：2HP
6. Cooling water recycle：to be delivered to the cooling water tank from the pool
7. Air pressure supply：7.5 bar max : 6.9m3/min
8. The power cable is enclosed to the inlet power of machine.
9. Hydraulic oil：600L

(2) Description of welding spec:
1. Transformer of welding capacity：1600KVA- A.C×2 sets
2. Inlet power：415V/50Hz/ single phase
3. Power consumption volume：2500～3000Amp (the usage rate of welding 50％)
4. Welding hydraulic cylinder：Ø250 high and low pressure ×2 sets; Ø80 high and low pressure ×2 sets
5. Hydraulic cylinder：30HP Ø3 phase/415V/50Hz
6. Welding method：One time welding (two cross lines will be welded per time) according to the size of workpiece. The welding time is 2～3 seconds per time.
7. Width of grille board：1000mm
8. Length of grille board：6000mm
9. Distance of loading rod ：30mm、40mm，two sets of clamping molds will be given for free (according to the instruction of buyer).
10. Size of loading rod ：(min size 20mm×3mm) (max size 75mm×6mm)
11. Distance of cross rod：100mm
12. Size of cross rod：(Min size 5.6mm) (Max size 8mm)(tetragonal iron twisting)
13. Steel spec：ASTM A36
14. Production speed：6pcs of boards/hour(width 1M×length 6M)